Site Fuel ToolkitOneStopPlant
More

The actual record

Fuel in.
Hours worked.

A fuel & hours log that tells added litres apart from measured use. No account required.

Add a fill

Start with a full tank and its hour reading. Enter 0 litres for an opening reading if you do not know that fill's quantity. Then record every top-up until the next full tank. Keep each machine in date and hour-meter order.

Up to 100 entries. A changed or reset meter needs a new reference.

Measured fuel use

—L/h

Add two full readings to close your first interval.

Litres added—
Closed measured hours—
Recorded cost—

Nothing is recorded yet. Partial or open periods are never counted as zero consumption.

Your entries 0

Start with an opening full-tank reading above, or try the sample to see a complete interval.

This session only.

Save a copy on this browser if you want to come back. Always export important records.

Make the numbers mean something

A top-up is not
a consumption rate.

The first full reading is your baseline. Oil or fuel already in that tank is not counted as consumption in the following interval. Every later top-up, including the final full refill, counts towards that interval.

When the tank is full again, this log divides those added litres by the difference in hour-meter readings. Open intervals remain unmeasured. Rates across complete intervals are weighted by hours, not averaged as separate rates.

Use consistent full levels, record every fill and do not mix machines or meter resets. Missing fills, leaks or fuel transfers cannot be detected automatically.

Read the full-to-full example

Blank fuel & hours worksheet

Machine / meter reference: ____________________

DateHoursLitres addedFull / partialTotal cost £
 
 
 

Clear this fuel log?

This removes all entries on screen and this tool's saved copy in this browser. Export anything you need first.