Enter the petrol you are mixing and the ratio from your engine manual. Calculate the oil to add.
Live calculation needs JavaScript
—ml oil
Enable JavaScript to calculate a mix. The reference chart below works without it.
Petrol5 LOil to add100 ml
Not to scale. The oil level shows how rich the ratio is, not a measured volume.
Mix chart
Oil to add, in millilitres, to petrol measured in litres
Petrol
25:1
40:1
50:1
1 litre
40 ml
25 ml
20 ml
2 litres
80 ml
50 ml
40 ml
5 litres
200 ml
125 ml
100 ml
10 litres
400 ml
250 ml
200 ml
Measured in gallons? Convert to litres first, or use the calculator. The column for your selected ratio is highlighted.
How the oil is worked out
Oil (ml)=Petrol (litres) × 1000÷Ratio
50:1 means 50 parts petrol to 1 part oil. Worked example: 5 litres × 1000 ÷ 50 = 100 ml of oil, added to the 5 litres of petrol.
Gallons are not all the same
1 UK gallon is 4.54609 litres. 1 US gallon is 3.785411784 litres. At 50:1, a UK gallon of petrol needs 90.9 ml of oil and a US gallon needs 75.7 ml. Pick the gallon your can is marked in.
Enter the petrol going into the can. The oil is added on top, so 5 litres of petrol plus 100 ml of oil makes about 5.1 litres of mix. If you need an exact finished volume instead, divide by the ratio plus one: 5 litres of finished 50:1 mix needs about 98 ml of oil.
Your manual sets the ratio
Ratios differ between engines and oils. 50:1 is common, not universal, and is only the starting value here. Most four-stroke equipment uses separate engine oil, but some systems such as STIHL 4-MIX use premix. Your model’s manual is the deciding source.
An example of a maker stating the ratio for its own machines: STIHL UK chainsaw fuel mix guidance. It applies to those models, not every engine.
Print a chart for the can
Print chart gives a compact A4 sheet with your current result, the formula, the gallon caveat and the table. Menus and buttons are left off so it stays readable in a van or site box.
Next: log the fill
Record what went into which machine and how long it ran. The fuel log can save a copy in this browser when you choose Save locally.
Is the oil amount for my petrol or for the finished mix?
For the petrol. Measure the petrol first, then add the oil shown. 5 litres of petrol at 50:1 takes 100 ml of oil and gives slightly more than 5 litres of mix.
Why does my gallon answer differ from another chart?
That chart probably uses the other gallon. At the same ratio a UK gallon (4.546 litres) needs about 20% more oil than a US gallon (3.785 litres). Choose the gallon your can is marked in.
Should I use 50:1 for every 2-stroke machine?
No. Use the ratio in your engine manual. If it gives 25:1, 40:1 or another figure, choose it or enter it as a custom ratio. Only use premix if your model’s manual specifies it.
onestopplant.co.uk · Fuel mix formula v1.0 · · Use the equipment manufacturer’s specified ratio.