Site Fuel ToolkitOneStopPlant
More

Tank measurements

Fuel & oil tank calculator

Internal dimensions to litres. Measure the inner tank, not the bund or outer casing.

Your tank

Use internal dimensions from the specification. Do not open or enter a tank to take measurements.

All measurements use the dimension units selected above.

Vertical liquid depth from the internal bottom, in the same units. Leave blank if not known.

Live calculation needs JavaScript

Geometric capacity

— litres

Estimated contentsNot calculated

Enable JavaScript to calculate. See the method for hand calculations.

Geometry only. This is not a safe fill limit or a fuel delivery instruction. Irregular ends and internal fittings change real capacity.

Know what you are measuring

Capacity is not
permission to fill.

Inner tank, not bund

A bunded tank has an outer containment case. Its outside dimensions do not describe the space holding the fuel. Use the manufacturer's internal dimensions or calibration chart.

Horizontal cylinders are different

Half the depth is half the volume, but a quarter of the depth is not a quarter of the volume. This tool uses the circular segment, not a straight-line percentage.

Known limits

These are simple rectangular or flat-ended cylindrical shapes. Curved ends, sloping bottoms, pipework and fittings need the manufacturer's capacity chart. The result is an estimate, not a certified capacity.

Hiring a fuel tank

Need temporary fuel storage? Compare fuel tank hire from National Tool Hire. Confirm usable capacity, fuel compatibility, bunding and delivery access with the supplier before choosing a tank.

See the formulas and worked examples

Keep the measurement useful

Record the next fill.

Log litres added and machine hours. Only complete full-to-full intervals become measured fuel use.

Open fuel & hours log